July 6, 2022
Tyre Fitting

All About Mobile Tyre Fitting

Tyre fitting is a process where a tyre technician fits the new tyre on the rim of a vehicle.

Why do you need Mobile Tyre Fitting?

Tyre fitting ensures that the new tyre is correctly attached to the rim, maximizes safety, and achieves an attractive appearance. Spare tyres or those from other vehicles should not be used for this purpose.

There are two types of car wheels: those with removable rims (often called “steel wheels”) which can be taken off and replaced entirely, and those with one-piece alloys (“all-in-one alloy wheels”), which cannot usually be disassembled – fitting a Hankook tyres Loughborough on these would mean cutting through any expensive corrosion protection layer present on them.

What equipment is needed to carry out tyre fitting?

A trained tyre technician will need the following equipment to carry out the necessary safety checks and complete the fitment process:

A vehicle lift or ramp is needed when replacing tyres on alloy wheels to raise the vehicle onto a suitable working platform, preventing accidents when rolling around under nearby vehicles. Tyre storage cabinets are also required when storing tyres in workshops.

The cabinets are designed with two separate compartments, typically one for each spare wheel to be held in reserve and its respective jack. They should always be kept locked so that they can’t be opened accidentally by anyone other than a suitably-trained professional who needs access for safe use of equipment in the workshop.

Rim protectors – These metal devices attach the tyre firmly to steel or alloy wheels with no adhesive. The tire’s bead is then broken, and the rim protector does not require any additional adhesive, although some technicians will install a small amount on an existing protective cover.

Tyre inflator -This device is used to quickly inflate the tyre, which is normally done using an electric compressor (used with an extension hose) or pneumatic compressor (used with a hose);

  • A pressure gauge, needed for reading the air pressure in the tyre during inflation;
  • A set of heavy-duty scissors, usually known as tyre levers;
  • A sturdy metal claw hammer was designed specifically for carrying out this task. It’s mainly used for removing stubborn tyres from alloy wheels or breaking the bead on a steel rim, allowing it to be easily removed;
  • A tyre pressure gauge for checking the interior of the tire’s inflation chamber.

What are the main steps involved in tyre fitting? 

The following are all stages of this key task that an expert technician must complete:

  • Prepare the equipment required to carry out tyre replacement. This involves removing rims protectors, inflating the new tyres using a compressor, and attaching them to their respective rims using rim protectors
  • Fit new tyres on steel rims before finishing with alloy wheels. These rims should have been cleaned thoroughly beforehand so that there is no risk of adhesive being applied incorrectly
  • Remove old tyres from alloy wheels and fit new ones while ensuring that the bead is broken so that they can easily be removed in the future.

What’s the difference between a tyre fitter and a tyre technician? 

To carry out this task correctly, a tyre fitter must have completed specialized training from an accredited body such as Q-Pro or The Factory Training Company (FTC), covering all aspects of fitting tyres safely according to the manufacturer’s guidelines. In contrast, a tyre technician has generally undergone specialist training covering many aspects of workshop management before learning how to install tyres. In addition to carrying out these tasks daily, technicians are also responsible for repairing punctures, balancing wheels, and conducting regular maintenance checks on vehicles’ brake systems.

What are the most common mistakes made during this procedure? 

Tyre fitting requires a high level of training and expertise to ensure that safety issues are not overlooked. The following are some common problems that often arise when an untrained person tries to carry out tyre replacement without appropriate experience:

  • Using punches, chisels, or screwdrivers to remove rims, protectors, risking damage to rims
  • Replacing tyres on alloy wheels using adhesive products yet forgetting excess glue must be cleaned up properly afterwards before it hardens
  • Forgetting about existing corrosion protection layers present on all steel rims because they should never make contact with any solvent-based product or other chemical substances, as their function would immediately become compromised;

 What must essential equipment be used when carrying out tyre replacement? 

The following items are crucial for correctly carrying out tyre replacement:

  • Rim protectors: they attach to alloy wheels so that tyres don’t break the rim upon removal, as these parts often feature sharp edges which could damage them
  • Tyre inflators: normally plugged into a car’s cigar lighter socket, it allows the Cheap Tyres Loughborough to inflate in no time at all with minimal effort from experts
  • Compressor: used to inflate tyres quickly and efficiently on steel rims so that they can be fitted with their adhesive strips in no time at all.
Spread the love

Leave a Reply